How to source custom packaging from China without surprises.
Producing packaging in China can make sense even for a small brand: the supply chain is broad, the range of processes is wide and runs can start from a few hundred pieces. The surprises, however, almost always come from the same places: a colour that does not match the file, a substituted material, a dimension that is off, a crushed carton, a missing document at customs. This guide shows where they come from, how to prevent them and what PPWR and EUDR change for anyone importing into the EU. Packaging production in China
In brief. Yes, even for a small brand. Surprises come from the same places: a colour unlike the file, a substituted material, a wrong dimension, a crushed carton, a missing customs document. They are prevented with a Pantone code and a proof on the real paper, a check before shipping and a plan that joins sample, production and freight. Projects start from 250 pieces per model.

When producing in China pays off, and when it does not
For a European brand, China is not only about price. The real advantage is the breadth of the supply chain: paperboard converting, glass, plastics, printing, finishing and inserts, with factories specialised in each process. That lets you develop the bottle, label, carton, rigid box and paper bag as one family instead of chasing five different suppliers.
It is not always the right choice. If you need a few dozen standard boxes with a logo at very short notice, a European self-service platform with online pricing is often more sensible. The same goes for urgent reorders: between sample, production and freight, China needs planning.
The honest rule is this: producing in China pays off when the project is custom, quantities are a few hundred pieces per model or more, and there is time to do things in the right order. With BlackSea LOGI, projects start from 250 pieces per model.
China makes sense if
- you need at least 250 pieces per model
- the structure, materials or finishes are custom
- you want to coordinate several items: bottle, label, carton, box, bag
- you can plan sample, production and freight with some margin
- you want premium finishes at a unit cost that still works
What can go wrong on the part: colour, materials, size, finishes
It is rarely bad faith. More often it is a missing piece of information, a file read differently or a check that was skipped. On the part itself, surprises mostly start in four places.
Colours that do not match the file
Screens show colour in RGB, print works in four-colour process (CMYK) or with Pantone inks, and the paper changes the result: the same navy blue stays bright on coated paper but prints darker and flatter on uncoated or natural stock. Matt or soft-touch lamination also mutes colours slightly.
You avoid it with a physical reference, not a photo: a Pantone code (C for coated, U for uncoated stock), a colour proof on the actual paper and the approved sample as the final reference. Printed gold and hot-foil gold are two different processes, too: the specification must say which one you want.
Substituted materials
The quote says ‘rigid board’, you picture 2 mm greyboard and receive 1.5 mm board that flexes along the long sides. Or the embossed paper becomes a smooth paper printed to imitate it, the paperboard insert becomes EVA foam, the bottle glass is lighter than the sample’s.
You avoid it by naming every material with thickness, weight and finish, for example ‘2 mm greyboard, 157 gsm matt wrapping paper’, and by keeping a signed reference sample: at inspection, a calliper and a scale are enough to spot the difference.
Dimensions and tolerances
A rigid box goes through cutting, gluing and wrapping, often partly by hand, and every step has its own tolerance. Problems start when nobody wrote it down, or when the drawing does not say whether dimensions are internal or external: with 2 mm board, mixing the two shifts length and width by about 4 mm each (two walls of 2 mm), and the bottle rattles or does not fit.
Start from the real product, with the cap or pump fitted, and state internal dimensions in millimetres, the order (length × width × height) and a tolerance, for example ±1 mm. Glass has tolerances too: size the label on the bottle’s real diameter, not the catalogue figure.
Finishes that change between render and part
Hot foil out of register, embossing too shallow, spot UV that does not line up with the print, soft-touch that scratches or holds fingerprints: on finishes, a render often promises more than production delivers, and fine lines or small text in foil or embossing do not always reproduce well.
The artwork needs a separate layer for each finish, with the foil colour, embossing depth and exact position; then everything is checked on the sample, not on screen.
Warning signs
- the quote does not name materials, thicknesses and paper weights
- nobody asks for the real dimensions of your product
- colour is approved on screen only
- finishes appear in the render but not in the artwork file
- there is no approved sample to act as the reference
What can go wrong on the way: freight, customs, timing
Even when the part is right, the journey can still hold surprises: packing, paperwork and the calendar matter as much as production.
Damage in transit
A rigid box that is perfect at the factory can arrive with crushed corners, a marked surface or warping from humidity: at sea a container crosses different climates for weeks, and export cartons that are too weak, or too heavy, give way when stacked.
You avoid it by treating packing as part of the product: double-wall cartons, a set number of pieces per carton, dividers, bags or tissue for delicate surfaces, corner protectors, stretch-wrapped pallets and desiccant bags in the container.
Documents and customs
Goods can be held because the invoice does not match the contents, the commodity code is wrong, the importer’s EORI number is missing or nobody decided who pays duty and VAT. Every day in port costs money.
You avoid it by deciding before shipment who the importer is, which Incoterm applies, which commodity code is used and which documents travel with the goods.
Lead times and Chinese New Year
Chinese New Year stops a large part of production. In 2027 the official holiday runs from 5 to 13 February, according to the calendar published by the Chinese government on 5 November 2026; many factories, however, close a few days earlier and restart gradually, because staff travel home for the festival. National Day, from 1 to 7 October 2027, also slows production and logistics.
You avoid it by planning backwards: if you need the packaging in spring, sample and approval must be closed before the break. Lead times for each project are confirmed in writing, as ranges, because they depend on sample, production and freight.
For your calendar
- Chinese New Year 2027: official holiday from 5 to 13 February
- Chinese National Day 2027: from 1 to 7 October
- sample approval before the break
- production and freight times confirmed in writing, as ranges
- a margin for inspection, packing and customs clearance
How to avoid it: a written specification and an approved sample
The rule is simple: if it is not written down, it does not exist. Before the order you need a technical specification that describes the part so that two people, in two different countries, read it the same way. It goes with the dieline: dimensions, cut and crease lines, and the position of every finish.
Then the sample. A plain white mock-up shows whether structure and size work; a pre-production sample, with the real materials and finishes, shows the result. Once you approve it in writing, that sample becomes the reference for the whole run: production is compared with it, not with the render.
A concrete example. For a 15 ml dropper bottle and its carton, the sample shows whether the bottle fits with the collar on, whether it stays put and whether the folded leaflet fits without bulging the panels. These are checks of a few minutes that save you from remaking an entire run.
With BlackSea LOGI, the sample is prepared after the feasibility review: €120 for a physical sample, shipping included, or €50 for a video of the real sample, without shipping. Both prices are VAT included. Prototypes and tooling outside these options are quoted separately.
What the specification should state
- structure: for example lid and base, magnetic book-style, drawer
- internal dimensions in mm (length × width × height) and tolerance
- materials with thickness and weight: board, wrapping paper, insert
- colours with a Pantone code or physical reference, and print method
- finishes with position, foil colour and embossing depth
- quantity per model, packing and destination country
Further reading
Pre-shipment inspection and packing
The most useful check happens before the goods leave, while corrections are still cheap. Pieces are drawn at random from the finished lot and compared with the approved sample: dimensions with a calliper, colour under the same light, finishes, assembly, magnet and insert hold, quantities and cartons.
How many pieces to check is not guesswork. Many inspections use the sampling plans in ISO 2859-1, indexed by AQL: you agree in advance how many pieces to check and how many defects are acceptable for each type of defect, and then decide whether the lot passes.
The packing needs checking too. An export carton must protect the goods, but also be easy to handle and withstand stacking. Soft-touch surfaces and dark papers are separated with tissue or bags; glass needs cell dividers; every carton should show the model, the quantity and the carton number, so whoever receives it can check straight away.
To check before the goods leave
- dimensions and assembly against the approved sample
- colour and finishes under the same light as the sample
- closure, magnets and insert tested with the real product
- quantity per model and number of cartons
- cartons labelled, well sealed and protected from humidity
- inspection photos and videos kept with the order
Freight and Incoterms, in plain words
Sea freight costs the least for large volumes, but it is also the slowest option; rail between China and Europe sits in between; air and courier are for samples and small urgent lots. Transit times depend on port, route and season, and have to be confirmed for every shipment.
The Incoterms® 2020 rules of the International Chamber of Commerce (ICC) set out who pays for what and where the risk passes from seller to buyer. Six of them are the most common with China.
EXW, Ex Works: you buy the goods at the factory door and everything from there is on you, including export clearance in China. It costs less on paper, but it is the hardest term to manage.
FCA, Free Carrier: the seller hands the goods, cleared for export, to the carrier you appoint, for example at your forwarder’s warehouse. For goods shipped in containers it is usually a better fit than FOB, as the ICC Academy explains.
FOB, Free On Board: the seller loads the goods onto the vessel at the named port, for example FOB Ningbo or FOB Shenzhen. Risk passes once the goods are on board; freight, insurance, EU customs and delivery are on you.
CIF, Cost, Insurance and Freight: the seller pays the sea freight and minimum insurance to the European port, but risk passes to you in China, at loading. It is the detail people miss most often.
DAP, Delivered at Place: the seller brings the goods to the agreed address; import clearance, duty, VAT and unloading stay with you.
DDP, Delivered Duty Paid: the seller delivers to destination with duties and taxes paid. It is the most convenient for the receiver, but you must clarify who the importer is, including for PPWR, EUDR and VAT purposes.
To write into the quote or contract
- Incoterm, precise place and version, for example ‘FOB Ningbo Incoterms® 2020’
- who insures the goods, and for what value
- who the importer is, and with which EORI number
- who pays duty, import VAT and clearance fees
- delivery address, opening hours and unloading equipment
Customs, duties and documents: who does what
Anyone importing into the European Union needs an EORI number, the identifier used for every customs operation. Duty depends on the commodity code and the country of origin: you check it in the European Commission’s TARIC database, which also shows any additional measures. It is normally calculated on the customs value, which includes freight and insurance up to the point where the goods enter the Union (Article 71 of the Union Customs Code); import VAT is then charged under the rules of the Member State where the goods are cleared.
Each component has its own code. For example, boxes and cartons of paper and paperboard fall under heading 4819, glass bottles and jars under 7010, plastic bottles, jars and caps under 3923. Your forwarder or customs broker confirms the exact subheading on the actual goods.
The documents must tell the same story: a commercial invoice with description, quantity, value and origin; a packing list with weights, number and size of cartons; and the transport document, meaning the bill of lading or the air or rail waybill. If one figure does not match, the goods stop.
Before the goods leave
- the importer’s EORI number ready
- commodity code confirmed for each component
- invoice and packing list consistent with the real contents
- duty and VAT included in the total cost
- forwarder or customs broker appointed in Europe
PPWR: what changes for packaging importers
Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) has applied since 12 August 2026 (Article 71). The ‘manufacturer’ is whoever has packaging designed or manufactured under its own name or trademark, so usually the brand, with special rules for micro-enterprises whose packaging supplier is based in the EU (Articles 3(13), 15(12) and 21); the ‘importer’ is a person established in the Union that places packaging from a third country on the market (Article 3).
The manufacturer carries out the conformity assessment, draws up the technical documentation and the EU declaration of conformity and keeps them for five years for single-use packaging; it also makes sure the packaging bears a type, batch or serial number, and gives its name and postal address on the packaging or via a QR code or other data carrier (Article 15). The importer checks that all this has been done and adds its own name and address (Article 18); an importer that places packaging on the market under its own name or trademark is treated as the manufacturer (Article 21).
There are material requirements as well. The sum of lead, cadmium, mercury and hexavalent chromium must not exceed 100 mg/kg (Article 5(4)), and for food-contact packaging PFAS limits apply from 12 August 2026 (Article 5(5)). Suppliers of packaging or packaging materials must give the manufacturer the information needed to demonstrate conformity (Article 16): with a factory in China, ask for it before the order, not after.
Looking ahead, packaging whose features only increase the perceived volume of the product, such as double walls, false bottoms and unnecessary layers, will no longer be allowed on the market, with some exceptions (Article 10(2)). According to the Commission’s PPWR guidance, C(2026) 3702, this applies from 1 January 2030, together with the duty to keep weight and volume to the minimum necessary (Article 10(1)). A harmonised label on material composition follows from 12 August 2028, or later depending on the implementing acts (Article 12). If you are designing a rigid box today, it is worth building this in now.
General information, not legal advice: who counts as manufacturer or importer, and which obligations apply to you, depends on how the supply is organised and on the size of your company. Have it checked by an adviser before you order.
To ask before ordering
- who will be importer and who manufacturer under the PPWR
- material declarations and heavy-metal tests on inks and pigments
- PFAS tests if the packaging touches food
- data to print or link via QR code: batch, name, address
- up-to-date technical documentation and EU declaration of conformity
EUDR: paper, board and deforestation
Regulation (EU) 2023/1115 on deforestation-free products (EUDR) also covers wood, and therefore paper and paperboard. As amended by Regulation (EU) 2025/2650, it applies from 30 December 2026. The postponement to 30 June 2027 for micro and small enterprises does not apply to products already covered by the EU Timber Regulation (No 995/2010), which include paper and paperboard (Article 38).
For packaging, what matters is how it reaches the market. Following Delegated Regulation (EU) 2026/2102, packaging placed on the market as a product in its own right remains in scope, while single-use packaging used exclusively to support, protect or carry another product, and presented with that product, is excluded. Empty boxes or cartons imported to be filled in Europe, like paper labels imported on their own, can therefore fall within scope: have your case checked, starting from the Commission’s EUDR guidance document (C/2026/3896).
Where paper and board fall within the EUDR, you need information on the origin of the wood, down to the geolocation of the plots of land required by Article 9: ask the factory for it well in advance. Paper and board made entirely from recycled fibre are outside the EUDR, while any share of virgin fibre is in scope, according to the same guidance: ask for the fibre composition too. Glass and plastics, on the other hand, are not among the commodities covered by the EUDR.
General information, not legal advice: the regulation and its amending acts are still evolving. Before importing paper or board packaging, check your case with an adviser or the competent authority.
| Date | What changes | Who it concerns |
|---|---|---|
| 12 August 2026 | PPWR applies: heavy metals up to 100 mg/kg in total; PFAS limits for food-contact packaging | Manufacturers (usually the brand) and importers |
| 30 December 2026 | EUDR applies to paper and board, with no postponement for micro and small enterprises | Paper and board packaging placed on the market as a product in its own right |
| 12 August 2028 or later | Harmonised label on material composition, depending on the implementing acts | Manufacturers |
| 1 January 2030 | No false volume; weight and volume kept to the minimum necessary | Manufacturers |
To check for paper and board
- whether the packaging arrives empty or with the product already inside
- the commodity code: paper and paperboard sit in Chapter 48
- the fibre: virgin, recycled or mixed
- the origin of the wood and the geolocation required by Article 9
- the date that applies to you: 30 December 2026 for paper and board
- the view of an adviser or the competent authority
Marketplace or a single point of contact: an honest comparison
Ordering directly on a B2B marketplace, or from a factory found online, can work. The listed price is often low, the choice is huge and you talk to the people who make the product. If you are buying a standard item, already know the supplier and have someone to inspect the goods locally, it is a legitimate route.
The comparison, however, has to be made on the total landed cost. The listed price usually covers the goods only: printing plates and tooling, samples, freight, insurance, duty, import VAT and clearance come on top. And you keep the specifications, revisions, quality control, language and time zone, PPWR and EUDR paperwork and, if something goes wrong, a dispute thousands of kilometres away.
A single point of contact is not automatically cheaper: the price includes design, sampling, checks and coordination. It pays off when the packaging is custom, when there is more than one item, and when you want one company to answer for the result, from sample to delivery.
Always compare
- the total landed cost, not the listed price
- who writes and checks the specifications
- who approves the sample, and against what reference
- who inspects the goods before shipment
- who handles freight, customs and documents
- who you turn to if something goes wrong
Further reading
How BlackSea LOGI works, from sample to delivery
BlackSea LOGI designs and produces custom packaging from A to Z: bottles, jars, labels, cartons, rigid boxes and magnetic gift boxes, inserts, paper bags, film and single-dose vials. We produce in China, in factories specialised in each process, and we follow every stage from sample to delivery. You have a single European point of contact and one company responsible.
It starts with the brief: a photo of the product, its dimensions, how many pieces per model (from 250), the destination country and when you need it. We prepare the concept, check feasibility, materials and finishes, and send a written quote that separates every item: creative direction, sample and tooling, production, freight, duty and VAT, with the agreed Incoterm.
Specifications reach the factory in writing, with dielines and colour references. The sample, physical or on video, is approved in writing and becomes the reference for the run; production starts only after your approval, and pre-shipment checks are agreed in advance. We give lead times as ranges and confirm them project by project, Chinese holidays included.
One example of a coordinated project is Careless Beauty: for the Royal Saffron & Lily Serum we coordinated the bottle, label, carton and information leaflet as one project, with the same ivory and gold identity.
What you get from us
- a written quote with every cost item separated
- a physical sample (€120) or a video sample (€50), after the feasibility review
- production only after your written approval
- checks agreed before shipment
- one point of contact, from brief to delivery
The next step
If you are considering production in China, let’s start from your product. Message a designer on WhatsApp or book a 30-minute call: we will tell you what is already clear, what needs checking on the sample and which documents to prepare for freight, customs, PPWR and EUDR.
You do not need everything ready. A photo of the product, its dimensions and the quantity per model are enough for a first answer; we complete the rest together, with the brief guide and the measuring guide.
What to send us to start
- product photo and dimensions, with the cap or pump fitted
- quantity per model, from 250 pieces
- destination country and city
- the date you need the packaging by
- artwork, logo or references, even provisional ones
Questions about producing in China
Projects start from 250 pieces per model. Some structures, materials or finishes can require higher quantities; we confirm this after the technical review, before the final quote.
After the feasibility review you can choose a physical sample at €120, shipping included, or a video of the real sample at €50, without shipping. Both prices are VAT included. Prototypes and tooling outside these options are quoted separately.
It depends on structure, finishes, quantity, time of year and type of freight. That is why lead times are confirmed for each project and given as ranges in the quote. Always plan around Chinese New Year: in 2027 the official holiday runs from 5 to 13 February.
It depends on the Incoterm and on who the importer is. Under EXW, FCA, FOB, CIF or DAP, import duty and VAT fall on the buyer; under DDP, on the seller. We state in the quote who does what, so the total cost is clear before you order.
In general the ‘manufacturer’ is whoever has the packaging designed or manufactured under its own name or trademark, so often the brand, with special rules for micro-enterprises; the importer has its own obligations, such as checking the documentation and adding its details. General information, not legal advice: have your case checked by an adviser.
The listed price often is; the total cost not always. Add tooling, samples, freight, duty, VAT, inspections and the time you spend on specifications and revisions. For standard items it can pay off; for custom, coordinated packaging, having someone who answers for the result matters more.
With a written specification, an approved sample that becomes the reference and checks agreed before shipment: dimensions, colours, finishes, assembly, quantities and packing are compared with the sample, not with the render.
Official sources
- Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) (opens in a new tab)EUR-Lex
Articles 3, 5, 10, 12, 15, 16, 18, 21 and 71. Roles of manufacturer and importer, micro-enterprises, documentation and marking, heavy metals and PFAS, false volume, labelling, dates of application.
- Commission Notice C(2026) 3702: guidance document for Regulation (EU) 2025/40 (opens in a new tab)EUR-Lex
Sections 2 and 10. The manufacturer is normally the filler, often the brand owner; both paragraphs of Article 10 apply from 1 January 2030. Non-binding guidance.
- Regulation (EU) 2023/1115 on deforestation-free products (EUDR) (opens in a new tab)EUR-Lex
Articles 9 and 38; Annex I. Paper and paperboard in scope, geolocation, dates for micro and small enterprises.
- Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 (opens in a new tab)EUR-Lex
New dates in Article 38 of Regulation (EU) 2023/1115. Application from 30 December 2026; postponement to 30 June 2027 for micro and small enterprises, except EUTR products.
- Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115 (opens in a new tab)EUR-Lex
Recitals 16 and 17; Annex, entries 4415, 4416 and Chapter 48. Packaging and labels placed on the market in their own right stay in scope; single-use packaging presented with the product it supports, protects or carries is excluded; recovered paper is excluded.
- Commission Notice C/2026/3896: guidance document for Regulation (EU) 2023/1115 (opens in a new tab)EUR-Lex
Section 7(a) and (b). When packing and packaging materials fall within the EUDR; products made entirely from recycled material. Non-binding guidance.
- Regulation (EU) No 995/2010, EU Timber Regulation (EUTR) (opens in a new tab)EUR-Lex
Annex. Pulp and paper of Chapters 47 and 48, left out of the postponement for micro and small enterprises.
- Regulation (EU) No 952/2013 laying down the Union Customs Code (opens in a new tab)EUR-Lex
Article 71(1)(e). Freight and insurance up to entry into the Union are part of the customs value.
- Economic Operators Registration and Identification number (EORI) (opens in a new tab)European Commission, DG Taxation and Customs Union
European Commission page. Who needs an EORI number for customs operations.
- TARIC consultation (opens in a new tab)European Commission
EU customs tariff database. Duties and measures by commodity code and country of origin.
- Incoterms® 2020 (opens in a new tab)International Chamber of Commerce (ICC)
Official ICC page. The eleven rules; CIF with minimum insurance cover.
- FCA & FOB Incoterms® 2020 explained: Key differences (opens in a new tab)ICC Academy
ICC Academy, 19 November 2024. FCA rather than FOB for containerised goods.
- ISO 2859-1:2026, Sampling procedures for inspection by attributes, Part 1 (opens in a new tab)ISO
Edition 3, January 2026. AQL sampling plans for pre-shipment inspection.
- 国务院办公厅关于2027年部分节假日安排的通知(国办发明电〔2026〕10号) (opens in a new tab)Government of the People’s Republic of China (gov.cn)
Published on 5 November 2026 (page in Chinese). Chinese New Year from 5 to 13 February 2027; National Day from 1 to 7 October 2027.
Sources consulted on 8 November 2026. Rules change: always check the version in force. The regulatory points in this guide are general information, not legal advice.
