Custom boxes with your logo: how to order from 250 pieces.
Ordering custom boxes with your logo comes down to four choices: the structure, the material, how the logo is applied and the insert that holds the product still. BlackSea LOGI designs and produces your boxes from A to Z, from 250 pieces per model, with production in China followed from sample to delivery. If you need fewer pieces or a standard format, an online platform is often the simpler route, and this guide also shows you how to tell.
In brief. Four choices make the box: structure, material, how the logo is applied (print, hot foil, embossing) and the insert that holds the product. We design and produce them from 250 pieces per model, with a sample before the run: €120 physical, shipping included, or €50 for a video of the real sample. Below 250 pieces, an online platform is often simpler.

How ordering works, step by step
The route is the same for a serum carton and for a magnetic gift box. You send us the product details (dimensions, weight and a few photos), the quantity per model, the delivery country, the date you need the boxes by and your logo. We check feasibility, choose the structure and materials with you, prepare the dieline your artwork sits on and send you a written quote with separate cost lines.
Then comes the sample: €120 for a physical sample, shipping included, or €50 for a video of the real sample, without shipping. Both prices are VAT included. Production starts only after your written approval, and BlackSea LOGI follows it through to delivery. Lead times depend on structure, finishes, approvals and freight, so we confirm them project by project, as ranges in the quote.
The steps, in order
- Brief: product, dimensions, quantity, country, date and logo
- Technical check of structure, materials and finishes
- Dieline and written quote with separate cost lines
- Physical or video sample, then written approval
- Production, agreed checks, packing and delivery
Five structures and when to choose them
The structure decides how the box opens, how well it protects the product and how much space it takes in storage and in transit. Choose it before you think about logo finishes, because it changes the materials, the dieline and the cost.
Folding carton
The standard box for cosmetics, fragrances and supplements: a single sheet of paperboard, die-cut and creased, that arrives flat and is erected by hand or by machine. It usually costs less than a rigid box, takes up little volume and works well with offset printing, foil and embossing. In the Careless Beauty project, for example, the artwork of the folding carton with a tuck-tab closure brings together the brand logo, a lily illustration and the serum’s name, in ivory and gold.
Rigid lid-and-base box
Two pieces of greyboard wrapped in paper. The lid can cover the full height of the base or only part of it, or sit on an inner neck that stays visible as a band. It is the classic choice for candles, jewellery, apparel and gift sets: it opens intuitively, and the logo on the lid is the first thing people see.
Magnetic book-style box
A rigid base and a hinged lid that closes with magnets hidden under the wrapping paper. The book-style opening makes the box part of the gift, which is why it is so common for PR kits, cosmetic sets and premium packs. It also comes in a collapsible version that ships flat and is assembled on arrival. Either way, the strength of the closure is checked on the sample.
Drawer box
A tray slides inside an outer sleeve and is pulled out with a ribbon or a thumb notch. It works well for jewellery, small sets and products revealed one at a time; the logo usually goes on the sleeve, sometimes on the floor of the tray too. Tolerance is the critical point: a sleeve that is too tight jams the drawer, while one that is too loose lets it slide out on its own.
Window box
A die-cut window shows the product without opening the pack, with or without a clear film glued inside. It makes sense when the product looks good and always sits in the same position, because the window has to line up with the label. The film is a different material from the board: keep that in mind when you think about separation and recycling.
Choose the structure based on
- Product weight and fragility
- Channel: shelf, e-commerce, gifting or PR kit
- The opening experience you want
- Shipping volume and storage space
- Second use of the box after opening
Materials and weights: what to ask for
Folding cartons use coated white or kraft paperboard, often between 300 and 400 g/m². The right weight depends on format, product weight and finishes: a carton for a 15 ml bottle and a box for a one-kilo set cannot share the same thickness.
Rigid boxes start from pressed greyboard, commonly 1.5 to 2.5 mm thick, wrapped in a glued sheet of paper. The wrap can be a coated paper printed in colour and laminated, or a speciality paper, through-dyed, embossed or linen-textured, that has character even unprinted and shows off foil and embossing. The inside can stay white or take a matching paper.
For e-commerce, an outer corrugated shipper is often added to protect the presentation box in transit, and it can carry the logo too. Ask for every material in the quote to be named, with its colour and its weight or thickness: ‘premium board’ is not a specification. If you need FSC-certified paper, it has to be confirmed for the specific supply.
In the quote, every material by name
- Paperboard or greyboard: type and weight or thickness
- Wrapping paper: reference, colour and surface
- Inner paper and insert material
- Lamination: gloss, matt or soft-touch
- Certifications required and documents available
Your logo on the box: printing and finishes
A logo can be printed, debossed, embossed or made to shine with foil. One main effect, done well, usually says more than three finishes competing with each other. The drawing of the logo matters too: very fine lines, small text and gradients behave differently in each process, and at the technical check we tell you what is worth simplifying.
Hot foil stamping
A metal die transfers gold, silver, copper, coloured or holographic foil onto the paper with heat and pressure. On smooth or laminated papers the edge is crisp; on heavily textured papers fine details can break up. Every design and every size needs its own die. Foil on soft-touch is possible but must be tested, because not every foil bonds the same way.
Embossing and debossing
With a matched pair of dies, male and female, the paper is pushed up (embossing) or down (debossing). Embossing can be blind, with no colour, or registered with foil for a logo that is gold and raised at once. The achievable depth depends on the thickness and fibre of the paper. On rigid boxes, foil and embossing are usually applied to the wrapping sheet before it is glued onto the board.
Spot UV
A gloss varnish applied only to the logo or a pattern creates contrast against a matt or soft-touch background. It also comes as raised UV, with a slight relief you can feel. Registration between print and varnish must be precise and is checked on the sample.
Soft-touch
A lamination or varnish with a velvety feel, very elegant on dark colours. It shows scuffs and fingerprints more easily, though, so it needs care in packing. Ask whether it is a film or a varnish: the look changes, as do compatibility with foil and glue and the way the box can be separated for recycling.
Your logo colour
For an exact brand colour, give the Pantone reference: C applies to coated papers and U to uncoated ones, and the same code looks different from one paper to another. On dark or through-dyed papers, four-colour process inks almost disappear, so light colours are achieved with screen printing, a white underlay or foil.
For each finish, specify
- Exact position and size on the dieline
- Foil colour or Pantone reference
- Panels involved: lid, sides, inside, insert
- Feel: flat, raised or debossed
- Priority, if the budget calls for simplifying
Inserts: the product must stay still
The insert holds the product in place, protects it and decides what is seen first on opening. The main options are folded paperboard, wrapped greyboard with shaped cavities, moulded pulp and foams such as EVA; each strikes a different balance between precision, protection, weight and look.
Cavities are drawn from the real dimensions of the product, not the catalogue ones: a cap a few millimetres taller is enough to touch the lid. You need finger room or a ribbon so the product comes out without pulling on the pump and, in sets, enough distance for the items not to knock together. The insert can carry the logo too, with foil on the platform or a printed card laid over the product.
A box built around the product is also the soundest choice under the new EU packaging rules: filling an oversized box with shredded paper or padding is no substitute for a designed insert, as we explain further down.
To design the insert we need
- Exact dimensions: width, depth, height or diameter
- Weight of each item and areas that must not be pressed
- Photos of the product from every side
- How your customer should lift the product out
- Fixed or removable insert
Further reading
Your logo file and the dieline
A good file saves whole rounds of corrections. The dieline is the 1:1 technical drawing of the box laid flat: it shows cut lines, crease lines and glue areas. Artwork is placed on that drawing, not on a generic template downloaded from the internet.
The logo file
You need a vector file, such as AI, vector PDF, EPS or SVG, with text converted to outlines and colours defined. For foil and embossing, also prepare a single-colour version at 100%. If you only have a JPG or PNG, the logo must be redrawn as a vector before dies and plates are made; any photos need 300 dpi at print size.
The box dieline
The dieline depends on the construction and the board thickness. A rigid box has separate dielines for the lid wrap, the base wrap, the inside and the insert, and the paper turns over the edges, so the artwork must run to the limit shown. The dieline is drawn once the dimensions have been checked; if you already have one, we start from it. In the Careless Beauty project, for instance, the carton design comes from the dieline artwork supplied by the client.
Put each finish on its own layer as a 100% spot colour, add 3 mm of bleed beyond the cut lines and keep the logo and text away from folds and corners.
A file ready for the check
- Vector logo with text converted to outlines
- Colours specified: Pantone C or U, or CMYK
- One layer per finish: foil, emboss, UV
- 3 mm of bleed beyond the cut lines
- PDF on the latest dieline version, with name and date
Further reading
Sample, production and shipping
With the sample, the idea becomes something you can hold. You check the dimensions and how the insert holds the product, the logo position, foil sharpness, emboss depth, colour against the reference, magnet strength or drawer glide, the corners and the paper turn-ins. Agree the approval criteria beforehand, so the decision does not depend on a first impression.
Production takes place in China, and BlackSea LOGI follows it from sample to delivery: before packing, the pieces are compared with the approved sample according to the agreed checks. Classic rigid boxes travel assembled, in outer cartons with protective sheets or film, which matter most for soft-touch and dark colours; folding cartons and collapsible rigid boxes travel flat and take up far less volume. The freight method is chosen according to your date and budget.
Around Chinese New Year many factories stop for several weeks: if you need your boxes in spring, approve the sample early.
Before approving the sample, check
- Dimensions, closure and product fit
- Logo position, sharpness and colour
- Embossing and debossing depth
- Corners, turn-ins and clean paper
- Packing and pieces per carton
Further reading
Online platform or custom project?
If you need fewer than 250 pieces per model, a catalogue format and your logo printed on a box that has already been engineered, an online platform with a configurator is often the most sensible choice: you see the price straight away and can order small quantities. It is not a second-best option. It is the right tool for that need, and we say so openly.
A custom project makes sense when the box has to be built around your product: dedicated dimensions and insert, combined finishes such as foil, embossing and soft-touch, or a coordinated range with the bottle, jar, label, leaflet or paper bag. In that case, BlackSea LOGI is one company accountable for design, sample, production and delivery, from 250 pieces per model. Special structures or materials may need higher quantities, which we confirm at the technical check.
A custom project pays off if
- You order at least 250 pieces per model
- The product needs its own dimensions or insert
- You want to combine several finishes on the logo
- The box is part of a coordinated range
- You want one contact from sample to delivery
Before you print: the EU rules to know
Regulation (EU) 2025/40 on packaging has applied since 12 August 2026 (Article 71). Article 10 requires weight and volume to be reduced to the minimum necessary by 1 January 2030 and, with limited exceptions, rules out packaging with characteristics that aim only to increase the perceived volume of the product, such as double walls, false bottoms and unnecessary layers. Article 24 adds that by 12 February 2028 whoever fills sales packaging must reduce empty space to the minimum necessary for the packaging to function, including product protection, and that space taken up by filling materials, such as paper cuttings or air cushions, counts as empty space. If the box is shipped inside e-commerce packaging, the same Article caps the empty space ratio of that outer packaging at 50%: from 1 January 2030, or three years after the entry into force of the implementing acts on the calculation method, whichever is later.
Directive (EU) 2024/825, which Member States must apply from 27 September 2026, prohibits generic environmental claims made to consumers, such as ‘environmentally friendly’, ‘eco-friendly’ or ‘green’, where recognised excellent environmental performance cannot be demonstrated, as well as sustainability labels that are neither based on a certification scheme nor established by public authorities. On the box, a specific and verifiable statement works better. The FSC mark may be printed only with a certified supply and under the FSC trademark rules: since 1 July 2026 a new version of the trademark standard has applied, with a transition period until 1 January 2029.
For cosmetics, the list of ingredients may be indicated on the outer packaging alone (Regulation (EC) No 1223/2009, Article 19): the carton needs room for the mandatory text, not just the logo. General information, not legal advice: check your own case with an adviser.
Check before printing
- Box sized to the product, with no false bottoms
- A designed insert instead of filling materials
- No generic environmental claims
- FSC mark only with a certified supply
- Room for the mandatory product information
Further reading
What BlackSea LOGI does, and what it does not
We design and produce logo boxes and, when needed, the whole packaging family of the product: structure, materials, artwork on the dieline, inserts, sample and production in China, followed from sample to delivery. One company is accountable for the whole route, with a designer as your direct contact.
We do not sell standard boxes from stock, we do not produce below 250 pieces per model, we do not give instant prices before the technical check, and we do not guarantee lead times: we confirm them project by project. A render or a concept, however realistic, is not a production specification: dimensions, materials and finishes are confirmed on the sample.
With BlackSea LOGI you get
- A technical check of dimensions, structure and materials
- A dieline and a written quote with separate lines
- A physical sample at €120 or a video sample at €50
- Production followed from sample to delivery
- One contact for the whole packaging range
Further reading
Your next step
Message a designer on WhatsApp with a photo of the product, its dimensions, the quantity per model, the delivery country and your logo, even a provisional one. We reply with the right questions and, once the details are sufficient, with the recommended structure and the steps to the sample.
Prefer to talk it through? Book a 30-minute call with a designer: it is the quickest way to clarify structure, finishes and quantities before the quote. If it suits you better, write to contact@blacksealogi.com.
In your first message
- Product photo and dimensions in millimetres
- Quantity per model and number of models
- Delivery country and target date
- Vector logo, even a provisional one
- The structure or finish you have in mind
Further reading
Questions about logo boxes
At BlackSea LOGI, production starts at 250 pieces per model. Special structures or materials may need higher quantities, which we confirm at the technical check, before the quote.
Yes. After the technical check you can choose a physical sample at €120, shipping included, or a €50 video of the real sample, without shipping. Both prices are VAT included, and production starts only after your written approval.
Vector: AI, vector PDF, EPS or SVG, with text converted to outlines and colours given as Pantone or CMYK. Foil and embossing also need a single-colour version. If you only have a JPG or PNG, the logo has to be redrawn before dies and plates are made.
It depends on the effect you want. Foil brings light and contrast; embossing plays on touch and is more discreet. Together, in register, they give the richest result, but they need dedicated tooling and a careful check on the sample. Very fine lines and small text need simplifying in both cases.
We do not give guaranteed lead times: they depend on structure, finishes, sample approval and freight. The quote shows them as ranges, to be confirmed project by project. Around Chinese New Year many factories stop for several weeks, so for spring deliveries it pays to start early.
For a few boxes in a standard format, an online platform with a configurator is usually the better choice: an instant price and small quantities. When you have a range to coordinate or larger quantities, we can design it together.
The FSC logo only if the supply is certified and the FSC trademark rules are followed. Generic environmental claims such as ‘eco-friendly’ or ‘green’, without recognised excellent environmental performance, are prohibited in dealings with consumers under Directive (EU) 2024/825, to be applied from 27 September 2026: a specific, verifiable statement is better. General information, not legal advice.
Sources consulted
- Regulation (EU) 2025/40 on packaging and packaging waste (opens in a new tab)EUR-Lex
Article 10; Article 24(1) and (4); Article 71. Packaging minimisation, empty space in sales and e-commerce packaging, filling materials, date of application.
- Directive (EU) 2024/825 on empowering consumers for the green transition (opens in a new tab)EUR-Lex
Article 4; Annex, points 2a and 4a of Annex I to Directive 2005/29/EC. Generic environmental claims and sustainability labels on the box, from 27 September 2026.
- Regulation (EC) No 1223/2009 on cosmetic products (opens in a new tab)EUR-Lex
Article 19(1)(g). The list of ingredients may be indicated on the packaging alone.
- FSC releases revised trademark standard for certificate holders (opens in a new tab)Forest Stewardship Council (FSC)
FSC-STD-50-001 V3-0: in effect from 1 July 2026, transition until 1 January 2029. Use of the FSC mark on printed boxes.
Texts consulted on 8 November 2026. The regulatory points in this guide are general information, not legal advice.
