How much custom packaging costs, line by line.
There is no price that fits every project: cost depends on structure, size, materials, finishes, quantity and delivery country. This guide sets out the lines in a quote, what pushes the unit price up or down and how to read the public prices you see online. At BlackSea LOGI, projects start at 250 pieces per model; a sample costs €120 as a physical piece, shipping included, or €50 on video. Both prices are VAT included.
In brief. There is no single price: cost depends on structure, size, materials, finishes, quantity and delivery country. Custom projects start at 250 pieces per model. A sample costs €120 physical, shipping included, or €50 shown on video. Send us the product, measurements and quantity: we prepare a written quote, line by line.
What we already know
- Minimum order
- 250 pieces per model
- The minimum applies to each model, not to the whole order.
- Sample
- €120 physical sample, shipping included €50 video of the real sample
- Offered after the technical feasibility review. Both prices are VAT included.
- Quote
- In writing, with each cost listed separately
- Series production
- Only after you approve the sample in writing

The short answer: six choices set the price
The price of custom packaging comes from a handful of choices: the structure (folding carton, rigid box, magnetic box, bottle or jar), the size, the materials, the finishes, the insert and the quantity per model. Then come the sample, freight, duties and VAT, which depend on the delivery country. That is why two quotes can only be compared when they describe the same object with the same cost lines.
For orientation: on 7 November 2026, a European online packaging platform listed a standard-size rigid magnetic box, 20 × 20 × 9 cm, at €11.17 per piece excluding VAT for 120 pieces; an Italian online printer listed 100 small folding cartons at a total of €131.66 to €216.86, VAT included, depending on the delivery date. These are third-party prices for standard formats: they show the order of magnitude, not an estimate for your project.
At BlackSea LOGI, production starts at 250 pieces per model. A sample costs €120 as a physical piece, shipping included, or €50 for a video of the real sample. Both prices are VAT included. The production price comes in a written quote with separate cost lines, after we have checked feasibility on your product.
The six choices behind the price
- Structure and size
- Materials and board thickness
- Printing and finishes
- Insert and product protection
- Quantity per model and number of models
- Delivery country, freight and duties
The lines a serious quote should show
A reliable quote does not stop at a unit price: it separates the costs, so you know what you are paying for and can compare it with other quotes. There are usually six lines.
Design and development: structure, dimensions, artwork and renders. It can be a separate line or built into the unit price, but it should be stated. Sample and tooling: the approval sample and, where needed, production tooling such as cutting dies, foil-stamping plates or embossing dies. These are one-off costs, and they weigh heavily on small runs. Production: the pieces themselves, with materials, printing, finishes, insert and assembly.
Freight: the cost depends on volume, weight, sea or air transport and the delivery address. Rigid boxes usually travel assembled, so volume matters more than weight. Duties: they depend on the type of goods, their origin and their destination. VAT: it follows the buyer’s country and tax status, and a price excluding VAT can only be compared with one including VAT once both are on the same basis. This is general information, not tax or customs advice.
Lines to get in writing
- Design: included or separate
- Sample: type, cost and what it checks
- Tooling: cutting dies, plates, embossing dies
- Production: unit price per quantity
- Freight: method and delivery point
- Duties and VAT: how they are handled
- Exclusions and how long the quote is valid
What pushes the unit price up or down
Structure is the first lever. A folding carton ships flat and needs fewer production steps; a rigid box is made of thick board wrapped by hand or by machine, has more components and takes up more space. A magnetic closure, a drawer, a lid and base or a book-style opening each change the materials and the assembly time. Size matters too: a larger box uses more material and more room in the container.
Materials and finishes are the second lever. A speciality or through-dyed paper, thicker board, gold or silver foil stamping, embossing or soft-touch lamination add material, process steps or dedicated tooling. One well-chosen finish often does more than three layered effects: it costs less and stands out more.
An insert is one more component to design and produce: a paperboard insert costs differently from one in moulded fibre or foam, and it has to hold the product still. Quantity spreads fixed costs over more pieces: tooling, machine set-up and checks weigh less on 1,000 pieces than on 250. The number of models works the other way: three different sizes of 250 pieces each usually cost more than a single model of 750, because every model needs its own tooling and set-up.
Bottles and jars follow the same logic. Starting from an existing shape and customising it with colour, printing or a label usually costs less than creating an exclusive shape, which needs a dedicated mould. The cap, pump or dropper and the type of decoration, such as screen printing or foil stamping on glass, also change the unit price.
That leaves packing and freight. Rigid boxes take up volume, so a well-planned shipping carton and the right number of pieces per carton change the freight cost. Sea freight costs less than air but takes longer: a close deadline can force air freight and raise the cost.
What drives the unit price
- Structure: folding carton, rigid, magnetic or drawer box
- Size and board thickness
- Wrapping paper and print colours
- Foil stamping, embossing, soft-touch
- Insert: material and precision
- Bottles and jars: existing shape or dedicated mould
- Quantity per model and number of models
- Packing, volume and freight method
- Structure: shape, opening and number of parts.
- Material: board, wrapping paper and thicknesses.
- Finishes: print, foil, embossing or lamination.
- Insert: material and number of cavities.
- Quantity: how many pieces per model.
- Destination: where and how the goods arrive.
- Cut line
- Fold line
- Dimension: L = length, W = width, H = height
Why we start at 250 pieces per model
Every model carries costs that do not depend on quantity: preparing the production files, the cutting die, tooling for printing and finishes, machine set-up, the sample and the checks. Below a certain volume, these costs weigh so much on each piece that a custom project no longer makes economic sense. For the projects we take on, the starting point is 250 pieces per model.
It is a starting point, not a rule for everything: special structures, speciality papers or custom colours can require higher quantities, which we confirm after the feasibility check. If you need fewer pieces, a self-service platform with standard formats is almost always the more sensible choice.
The minimum applies per model: a box with a different size or structure is another model. For variants that only change the artwork, just ask: it depends on printing and production, and we check it for your project.
Before we talk quantities
- How many pieces per model
- How many models or sizes
- Artwork-only variants, if any
- Repeat orders expected in the coming months
- Non-standard materials or finishes
The sample: what it costs and what it checks
The sample turns the project into something you can hold: size, structure, insert, colours and finishes are checked before production, not after. We propose it after the feasibility check, once the structure and materials are defined.
A physical sample costs €120, shipping included; a video of the real sample costs €50, without shipping. Both prices are VAT included. Prototypes or tooling outside these two options, if needed, are quoted separately.
The video costs less and saves time when you only need to see proportions, opening and finishes. The physical sample is the right choice when you need to try the product in the box, feel the paper or show the result to your team. Before the production run, written approval of the sample fixes what will be produced.
What to check on the sample
- The product goes in and comes out easily
- Size, opening and closure
- How well the insert holds
- Colours, paper and finishes
- Changes to put in writing before production
Public reference prices, with dates
To give you an order of magnitude, we collected prices that packaging platforms and print services publish online. We list them without names, by type of supplier, as they appeared on 7 November 2026. They are not BlackSea LOGI prices and can change at any time: always check the current price before you order.
How to read them: almost all cover standard formats and small quantities with an instant price. VAT is shown the way the source shows it, sometimes included, sometimes excluded. The same product can be priced differently on different country versions of a site: a magnetic box of the same size cost €11.17 per piece on the English-language site and €10.39 on the German one. And for the same order of 100 small folding cartons, the fastest delivery raised the total from €131.66 to €216.86.
| Product | Quantity | Price per piece | Source and date |
|---|---|---|---|
| Rigid magnetic box 20 × 20 × 9 cm, 1.9 mm board, made in Europe | 120 pieces | €11.17 excl. VAT (€1,340.92 in total) | European online packaging platform, 7 November 2026 |
| Magnetic cosmetics box 20 × 20 × 9 cm | 120, 150, 180 pieces (840 on request) | €13.81, €12.02, €10.63 excl. VAT | Same platform, 7 November 2026 |
| Box with magnetic closure | 25 pieces | €11.00 incl. VAT (€274.99 in total) | International online print service, Italian site, 7 November 2026 |
| Gift box | 50 pieces | €4.14 incl. VAT (€206.99 in total) | International online print service, Italian site, 7 November 2026 |
| Folding carton box 8 × 7 × 4 cm, not rigid | 1 piece; 100 pieces | €12.66 to €20.86; €131.66 to €216.86 in total for 100, incl. VAT, by delivery date | Italian online printer, 7 November 2026 |
| Printed box, homepage example (configuration and VAT not stated) | 1, 100, 500, 1,000 pieces | €19.03, €1.84, €0.98, €0.63 | Italian online box configurator, 7 November 2026 |
| Print set-up for a logo box | Per order | €0 digital; from €155 screen printing (1–4 colours); from €240 foil (1–2 colours); incl. VAT, shipping extra | German logo-box configurator, 7 November 2026 |
Self-service platform or custom project?
Self-service platforms are excellent when you need a few pieces of a standard box: you choose the format and quantity, upload your artwork and see the price straight away. Below 250 pieces per model, or when a catalogue box already suits your product, they are almost always the more sensible choice. We will tell you so ourselves.
A custom project makes sense when the packaging has to be built around the product: non-standard dimensions, a shaped insert, a specific paper or finish, or several items to coordinate, such as bottle, label, carton and rigid box. That is what BlackSea LOGI does: we design and produce your packaging from A to Z, with production in China overseen by us from sample to delivery. One company is accountable for design, sample and production. For Careless Beauty, for example, we coordinated a 15 ml glass dropper bottle, label, folding carton and information leaflet as one project.
What we do not do: instant prices, orders below 250 pieces per model, or promises on timing before materials and freight have been checked. What we do: a quote with separate cost lines, a sample before the production run and a single point of contact, a BlackSea LOGI designer, from the first message to delivery.
How to choose
- Fewer than 250 pieces per model: self-service platform
- Catalogue box and an instant price: self-service platform
- Non-standard size or structure: custom project
- Insert shaped around the product: custom project
- Bottle, carton and box designed together: custom project
What to send us for a reliable quote
The more precise the brief, the closer the quote gets to the final price. You do not need everything at once: the product, the quantities and the delivery country are enough for a first answer. For a quote that still holds after the sample, though, we need verified measurements and clear choices on structure, materials and finishes.
Measure the product as the measurement guide explains and use the brief guide to gather the rest: you will find links to both below. If you already have packaging, a photo with a tape measure beside it is a very good start. Tell us when you need the goods, too: it changes how they ship, and so the cost.
To send with your request
- Product, photos and verified measurements
- Weight, if the product is heavy or fragile
- Quantity per model and number of models
- Preferred structure, materials and finishes
- Delivery country and city
- Date you need the packaging by
- Artwork or logo, even provisional
Further reading
Send us the product: we will tell you what a reliable price needs.
Message a designer on WhatsApp or by email with the product, quantity per model and delivery country. We reply with the right questions and, once the details are sufficient, with a written quote.
Questions about cost
It depends on structure, size, materials, finishes, insert and delivery country, so there is no figure that fits every project. With the product, measurements, quantity and destination, we can prepare a written quote with separate cost lines. The public prices in this guide, checked on 7 November 2026, give an order of magnitude for standard formats.
Yes: €120 for a physical sample, shipping included, or €50 for a video of the real sample, without shipping. We propose it after the feasibility check; both prices are VAT included.
Custom projects start at 250 pieces per model. If you need fewer pieces, a self-service platform with standard formats is usually the more sensible solution.
The minimum applies to each model: a different size or structure counts as another model. For variants that only change the artwork, ask us: it depends on printing and production, and we check it for your project.
Only if the written quote says so. In our quotes, freight, duties and VAT are separate lines, so you can see what is included before you decide.
Because a custom project depends on your product: we first check measurements, structure, materials and feasibility. When the details are sufficient, we can give you an indicative price range; the final quote comes in writing, with separate cost lines. For standard formats with an instant price, self-service platforms are the right choice.
It can. If the timeline does not allow sea freight, air freight is faster but costs more. That is why we ask for your delivery date from the start, and we do not promise timing before production and freight have been checked.
